Molybdenum-Copper Stage Heater
HEATING POWER IN A SMALL PAKAGE
The Molybdenum Copper Stage Heater is designed to heat a 1mm x 1mm x 0.5mm thick component to a maximum exposure of 200°C continuous, with very precise temperature uniformity for sampling purposes.
A highly effective assembly reaching temperatures of 200°C in under one minute utilizing only 2.6 watts. Because of the low mass and high conductivity of the moly copper base, reaching the target temperature and cooling down is highly efficient.
Features
- Temperature <201°C
- Internal element must be able to withstand temperature <210°C
- A cold section was not needed
- Copper - Molybdenum (Copper-Moly) base
- 12Volt, 3Watt (Max)
- Two thermocouple type “K” external
- M1 threads
There are two thermocouples used to verify the test temperature. One TC is an exposed bare-bead TC 36 AWG, the second TC being a 0.062ӯ probe style unit. The M1 threads are included.
BCE Engineering & Quality Assurance
BCE engineers provide decades of experience in design and development, delivering a wealth of empirical data and experience. BCE welcomes your custom requirement and will design and deliver a part that meets your challenging needs.
BCE is recognized for its commitment to quality and excellence by being certified in accordance with ISO 9001:2015.
